Flachdichtung SIGRAFLEX® Universal, Profil FD01, WS 3862, Dichtungsdicke 2 mm, Rev. 00
La junta plana consiste en una placa perforada de acero inoxidable (1.4401) con una capa de lámina de grafito en ambas caras. La unión es no adhesiva. Las capas de recubrimiento de grafito están impregnadas.
Número de artículo
3862FD01
Material
3862
Perfil
FD01
| Type of gasket: | Type IBC - flat gasket |
|---|---|
| Gasket manufacturer: | IDT Industrie- und Dichtungstechnik GmbH |
| Gasket label: | Flachdichtung SIGRAFLEX® Universal , Profil FD01, WS 3862, Dichtungsdicke 2 mm, Rev. 00 |
| maximum temperature: | 300 °C |
| maximum pressure: | 16 bar |
Inhaltsverzeichnis
Downloads
Gasket thickness under load eG
No data available.
Gasket deformation under load ΔeG
No data available.
Maximum allowable gasket stress QSmax
| Temperature / °C | QSmax / MPa |
|---|---|
| 20 | 200 |
| 150 | 200 |
| 300 | 160 |
Modulus of elasticity EG
| Modulus of elasticity EG / MPa | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gasket stress / MPa | 20°C | 150°C | 300°C | |||||||||
| 20 | 405 | 491 | 524 | |||||||||
| 30 | 627 | 756 | 750 | |||||||||
| 40 | 798 | 778 | 860 | |||||||||
| 50 | 1035 | 1225 | 1097 | |||||||||
| 60 | 1196 | 1181 | 1511 | |||||||||
| 80 | 1797 | 1747 | 1597 | |||||||||
| 100 | 2186 | 2268 | 1922 | |||||||||
| 120 | 2393 | 2647 | 2440 | |||||||||
| 140 | 2449 | 2364 | 2742 | |||||||||
| 160 | 2517 | 2498 | 2693 | |||||||||
| 180 | 2836 | 2743 | ||||||||||
| 200 | 3141 | 2664 | ||||||||||
Creep/relaxation factor PQR
| Creep/relaxation factor PQR | |||
|---|---|---|---|
| Gasket stress / MPa | 20°C | 150°C | 300°C |
| 30 | 0.98 | 0.92 | 0.91 |
| 50 | 0.98 | 0.96 | 0.93 |
| 200 | 1 | 0.99 | 0.99 |
Minimum required gasket stress in assembly Qmin(L)
| Minimum required gasket stress Qmin(L) / MPa | |
|---|---|
| Leakage rate / mg/m/s | 16 bar |
| 10⁻² | 27 |
Minimum required gasket stress in service QSmin(L) depending on initial gasket stress QA
Minimum required gasket stress at internal pressure 10 bar
Minimum required gasket stress at internal pressure 16 bar
Friction coefficient µG
The friction coefficient between gasket and flange surface was determined for different types of gasket materials in an ESA research project.
The gasket Flachdichtung SIGRAFLEX® Universal , Profil FD01, WS 3862, Dichtungsdicke 2 mm, Rev. 00 can be assigned to the categorie 3 : "Gaskets based on flexible graphite". Therefore, the following friction coefficients can be considered:
| Temperature / °C | Friction coefficient |
|---|---|
| 20 °C | 0.22 |