Resultados de la búsqueda

Sin resultados

Filtro de búsqueda

Kammprofildichtung, Silberauflage, Profil KD01-KD10-KD20-KD30, WS 1.4828/Silber, Dichtungsdicke 4,8 mm, Rev. 03

Type of gasket: Kammprofile gasket
Gasket manufacturer: IDT Industrie- und Dichtungstechnik GmbH
Gasket label: Grooved gasket, silver layer, Profile KD01-KD10-KD20-KD30, WS 1.4828/silber, thickness 4,8 mm, Rev. 03
maximum temperature: 600 °C
maximum pressure: 80 bar

Inhaltsverzeichnis

Downloads

Gasket thickness under load eG

No data available.

Gasket deformation under load ΔeG

No data available.

Maximum allowable gasket stress QSmax

Temperature / °C QSmax / MPa
20 600
200 600
400 600
600 200

Modulus of elasticity EG

Modulus of elasticity EG / MPa
Gasket stress / MPa 20°C 200°C 400°C 600°C
20 196000 182000 166000 150000
200 150000
600 196000 182000 166000

Creep/relaxation factor PQR

Creep/relaxation factor PQR
Gasket stress / MPa 20°C 200°C 400°C 600°C
40 0.98 0.57 0.33 0.48
80 0.98 0.63 0.41 0.51
200 0.72
600 0.99 0.9 0.86

Minimum required gasket stress in assembly Qmin(L)

Minimum required gasket stress Qmin(L) / MPa
Leakage rate / mg/m/s 10 bar 40 bar 80 bar
10⁰ 20 20 87
10⁻¹ 64 75 102
10⁻² 83 90 106
10⁻³ 98 103 111
10⁻⁴ 104 115 116
10⁻⁵ 109 123 121
10⁻⁶ 114 129 128
10⁻⁷ 119 135 135
10⁻⁸ 272 169 244

Minimum required gasket stress in service QSmin(L) depending on initial gasket stress QA

Minimum required gasket stress at internal pressure 10 bar

Minimum required gasket stress at internal pressure 40 bar

Minimum required gasket stress at internal pressure 80 bar

Friction coefficient µG

The friction coefficient between gasket and flange surface was determined for different types of gasket materials in an ESA research project.

The gasket Grooved gasket, silver layer, Profile KD01-KD10-KD20-KD30, WS 1.4828/silber, thickness 4,8 mm, Rev. 03 can be assigned to the categorie 0 : "Custom". Therefore, the following friction coefficients can be considered:

Temperature / °C Friction coefficient
0 °C 0